40 series Software
The 40 AMP & CD provides two options on the rear panel for upgrading the software version, and is controlled entirely via the menu and remote control. You can choose to use either of the following:
- USB-A Storage drive/key
- Ethernet (internet)
Please read through the software instruction document to help you decide which update option works best for you.
Upgrading the 40 ST software is carried out entirely via the unit itself and the BluOS app. You are not able to upgrade using a USB key as is available on the 40 AMP & 40 CD.
As the 40 ST is always connected to your home router (internet), if an upgrade is available, you will be made aware of this when turning on the unit. If you wish to progress with the update (recommended), please follow all instructions on the display and the BluOS app until the upgrade has completed.
AVAILABLE SOFTWARE UPGRADES
Version Details:
REDMINE-803 – Display is blank, flashes lines on power up
REDMINE-1093 – Auto Display Off
REDMINE-1099 – If buttons are pressed on the unit and autohide is enabled but not
triggered, key behaviour is not correct
REDMINE-1103 – Change Activity Sensor Active timer to 200ms
Previous Upgrade Versions
40 AMP – Download v1.0.114
AVAILABLE SOFTWARE UPGRADES
Version Details:
REDMINE 800 – Remote Display off/on button
REDMINE 803 – Display is blank, flashes lines on power up
REDMINE 1057 – USB Upgrade download fails when reading from USB drive
REDMINE 1079 – Menu highlight bar offset over text
REDMINE 1081 – LED icons not lit – requires hard power to restore.
REDMINE 1099 – If buttons are pressed on the unit and autohide is enabled but not triggered, key behaviour is not correct
REDMINE-1093 – Auto Display Off
REDMINE-1103 – Change Activity Sensor Active timer to 200ms
Previous Upgrade Versions
The latest software version available is v1.0.92 and provides the following updates.
Version Details:
REDMINE 800 – Remote Display off/on button
REDMINE 1079 – Menu highlight bar offset over text
REDMINE 1081 – LED icons not lit – requires hard power to restore.
REDMINE 1099 – If buttons are pressed on the unit and autohide is enabled but not
triggered, key behaviour is not correct
REDMINE-1093 – Auto Display Off
REDMINE-1103 – Change Activity Sensor Active timer to 200ms
AVAILABLE SOFTWARE UPGRADES
Version Details:
LED Brightness values changes to match other 40 Series Units
Below is the latest version of the USB driver for the 40 AMP. Included in the download is an instruction pdf and driver files.
